Do the ironing centers fit between the studs?

All models, except the NE-242, are designed to fit between standard 2” x 4” studs on 16” centers.

Can the ironing center be installed at any height?

All models can be installed at the height of your choice. Typical Ironing board height is 34” – 36” from the floor.

Are the ironing centers difficult to install?

The ironing center is very easy to install. The product basically requires identifying the desired location, cutting and removing the drywall, slipping the unit between the studs and attaching it with the installation screws provided. All units are preassembled and ready to install.

Are the electrical models hard to wire?

Electrical models are prewired so they only need to be pigtailed with the incoming electrical wire. The pigtails are located at the bottom of the electrical raceway. All electrical work must be done in accordance with all applicable electrical codes. Electrical models utilize 15 AMP.

If we don’t order the swivel now, can we get it later?

The swivel is not a retrofit item. Since it utilizes more interior space due to its rugged undercarriage, the frame on a swivel cabinet is deeper than cabinets without swivels. For this reason, swivels must be ordered at the time of purchase and cannot be added later. Where applicable, all other options available on the ironing centers can be added after the original purchase.

How do we get replacement cover and pads?

Ironing Board Cover and Pad is a standard feature on all units. Replacement cover and pads can be ordered online right here!

Can we order the ironing center without a door?

A “No Door” option is one of the available options. If selected, the unit will arrive without a door allowing you to match custom cabinetry. When this option is selected the piano hinge and door hardware is not included with the unit. This is done so you can match hardware with your cabinetry.

Does the door come prefinished?

All wood doors come unfinished so you can customize your unit to match the room décor. Interior has been painted a cool gray saving you hours of unnecessary finishing time. (NE-242 with white flat door comes standard with white interior and exterior color.)

What are the door dimensions?

Rough-in openings for all models except the A-46 are 14 1/4” W X 47 1/8” L X 3 7/8” D. The Model A-46 is 14 1/4” X 59 7/8” L X 3 7/8” D.

Can the door be hinged on the left side?

Yes, all units may be ordered with a left-hand hinge at no additional charge. All units come standard with a right-hand hinge. (As you face the unit the hinge is on the right-hand side of the cabinet.)

Will it hold all irons?

The hot iron storage area is designed to hold the majority of all major brands of irons with the exception of very large, specialty irons designed for the sewing industry.